First of all, ensure the suction mechanism is unlocked by turning it in a counter-clockwise direction. Place the suction cup on a clean, smooth, flat surface. Press down firmly to ensure a tight seal. Turn the suction mechanism clockwise to lock the mirror into place. Please note that your mirror will not stick to surfaces such as drywall, wallpapers, stucco, or any textured walls.
The mirror is not waterproof. To protect against electrical hazards, do not use while bathing or in the shower.
The mirror is designed to be suctioned to such surfaces as mirror, ceramic, marble, acrylic, porcelain and enamel. However, some of our customers have mentioned that they use this mirror for their vanity tables and do not use the suction cup, simply let is stand by itself. And it seems to work just fine!
Make sure you are using the small adapter that comes inside the box. Attach this adapter to the humidifier and then screw on the water bottle. If the bottles you are using are not working, please use a 591 ml Coca-cola bottle which you can buy from any convenience store - it will definitely work!
You should change the filters every 1 - 2 months. You can buy additional filters here on our website or from our store on Amazon.
If you never change the filter, bacteria can build up after a long period of time.
To prevent any damage, this humidifier should be used with water only.
Yes, you can use your facial brush in the shower as it is waterproof, just make sure that the battery compartment is locked and secured. However, please do not leave it emerged in water for a long time as it might still do some damage to the unit.
Yes, you can buy them on our store on Amazon.com.
The brush is designed to slow down when pressed too much because otherwise it may do damage to your skin. Just select the right brush head and it will work efficiently without any pressure.
If the light is flickering or does not turn on, check the batteries or try inserting new ones. If the issue still occurs,it might be that you have received a defective unit. In such case, please contact our Support Team, they will solve the problem right away.
All strong magnifiers have this tendency of rotating the image upside down if they are not held close enough to the object. Try holding it at 1-2 inches distance and then slowly pulling it away until you get a clear image.
First, place the loupe directly onto the object (or it may go inside the clear plastic if it is a small object, like a ring). Slowly turn the black part of your magnifier counter-clockwise until you get a clear focused image.
Please make sure that the protective film has been removed. If it is still there, it may give the illusion of scratches. Otherwise, we will send a replacement unit to you free of charge if this product is in fact damaged.